Power Switch Position Indicator Does Not Illuminate

POWER SWITCH POSITION INDICATOR DOES NOT ILLUMINATE

Description

- Before performing the diagnosis in the following table, check "Work Flow". Refer to "Work Flow" Work Flow.
- Check that vehicle is under the condition shown in "Conditions of vehicle" before starting diagnosis, and check each symptom.

Conditions of Vehicle (Operating Conditions)

- "ENGINE START BY I-KEY" in "WORK SUPPORT" is ON when setting on CONSULT.
- One or more of Intelligent Keys with registered Intelligent Key ID is in the vehicle.


Diagnosis Procedure


1. CHECK POWER SWITCH POSITION INDICATOR

Check power switch position indicator.
Refer to "ComponentFunctionCheck" Power Switch Position Indicator.
Is the inspection result normal?
YES- GO TO 2.
NO- Repair or replace the malfunctioning parts.

2. CONFIRM THE OPERATION

Confirm the operation again.
Is the result normal?
YES- Check intermittent incident. Refer to "Intermittent Incident" Intermittent Incident.
NO- GO TO 1.