Removal And Installation

BATTERY TERMINAL WITH FUSIBLE LINK

Removal and Installation


REMOVAL

1.Disconnect the 12V battery cable from the negative terminal. Refer to "Exploded View" Exploded View and PG6, "Precaution for Removing 12V Battery".

CAUTION:
To prevent damage to the parts, disconnect the 12V battery cable from the negative terminal first.
2.Remove cover of 12V battery positive terminal.
3.Disconnect the 12V battery cable from the positive terminal. Refer to "Exploded View" Exploded View.
4.Open cover of harness mounting nut.
5.Remove harness mounting nut and battery terminal with fusible link mounting nut.
6.Disconnect harness connector and remove battery terminal with fusible link.

INSTALLATION

Install in the reverse order of removal.

CAUTION:
To prevent damage to the parts, connect the 12V battery cable to the positive terminal first.