FREE REPAIR MANUALS & LABOR GUIDES 1982-2013 Vehicles
Courtesy of Operation CHARM: Car repair manuals for everyone.
Home >> Nissan-Datsun >> 2011 >> Leaf ELE-Electric Engine >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Accessories and Optional Equipment >> Communications Control Module >> Description and Operation >> Telematics System >> System Description

System Description




SYSTEM

TELEMATICS SYSTEM : System Description

NOTE:
To use the Telematics systems Users must apply for subscription separately.
- The Telematics system provides information and services that can support secure and comfortable use of vehicles by a constant link of the vehicle and user through the Nissan CARWINGS Data Center.
- Available service functions of the Telematics system are CARWINGS service functions.
- TCU integrates a wireless communication terminal and sends/receives data with the Nissan CARWINGS
*1*2
Data Center via TEL antenna using packet communication and SMS .
NOTE:
- *1: Packet communication is the communication method that sends/receives data in a small packet.
Divided data is referred to as a packet and the communication line can be efficiently used.
- *2: SMS stands for Short Message Service. It is also referred to as Text Messaging, Short Mail, etc. It is the service that performs text based message communication.
- The AV control unit and TCU are connected with the USB communication for sending/receiving operation signals and data signals.
- To use the Telematics system, it is necessary to activate TCU. The necessary conditions are as per the following items.
- Join the Telematics service.
- Register the user ID and password in advance. (They are required for activation.)
- For activation operation, refer to {LINK_TO_MANY:0000000007636033}{LINK_TO_MANY:0000000007636034}{LINK_TO_MANY:0000000007636035}, "ADDITIONAL SERVICE WHEN USING TELEMATICS SYSTEM
(WORK STEP VIEW) : Process Chart".

COMMUNICATION SIGNAL

- TCU is connected to the AV control unit through USB communication (USB 1.0), and it sends/receives reception data of TCU and operation signals of the AV control unit.
- TCU is connected to VCM, HVBAT (Li-ion Battery) and OBC (On-Board Charger) through EV CAN, and it sends/receives vehicle information.

CARWINGS SERVICE FUNCTION

The following services are provided for each situation.










Automatic Update of Charge Facility/Search for Nearest Charge Station
- Nearby charge stations around the user's vehicle (area of within a radius of 25 km <15-1/2 miles> from the vehicle) are automatically updated when the low battery warning lamp turns ON.
- Neighborhood charge stations around user's house (area within approximately 160 km )
are automatically updated periodically.
- If the battery capacity is low during driving, a charge warning is given in 3 steps. If the user follows the warning, data is sent/received to/from the Nissan CARWINGS Data Center. Charge facilities around the vehicle are searched, and guidance is started on the navigation system. The search location is memorized on the
AV control unit as charge station information.
- When the user selects update of the charge facilities in the area, data is sent and received to/from the Nissan CARWINGS Data Center. Charge facilities around the area are searched, and the locations searched are memorized to the AV control unit as charge station information.
NOTE:
Up to approximately 1,000 charge stations can be memorized.
Information channel/probe information
- Start the navigation menu or power switch with external signals and perform data communication with the
Nissan CARWINGS Data Center through TCU.
- Information channel obtains various kinds of information such as Internet content prepared by the Nissan
CARWINGS Data Center and provides voice guidance and display guidance.
- For voice sound used in the information channel, TCU receives the text data from the Nissan CARWINGS
Data Center through the TEL antenna in packet communication and sends it to the AV control unit. The AV
control unit converts the text data to voice signal and sends it to the front speaker.
- If CARWINGS reading voice is output while the audio is ON and/or the voice guidance is being output, these audio sounds are muted and only the CARWINGS reading voice is output.
- Various vehicle information data (battery condition, driving distance, warning display, etc.) is sent to the Nissan CARWINGS Data Center to store the data. The timing for transmission is the information channel, ECO
drive connection, fastest route search and connection to operator service.
Remote Air Conditioning (Immediate ON/Timer Reservation) Operation
Before/after driving the vehicle, remote air conditioning operation can be performed through the Nissan CARWINGS Data Center by operating a user's cellular phone or PC. When using the remote control operation, the vehicle must be stopped in a location where radio waves between the Nissan CARWINGS Data Center and the vehicle can be received.
- Vehicle air conditioning can be turned ON by remote control by operating a user's cellular phone or PC.
NOTE:
If air conditioning is operated with the charging plug inserted, battery power is saved.
- The user operates the remote air conditioning with a cellular phone or PC and sends the data to the Nissan
CARWINGS Data Center via the web site.
- The Nissan CARWINGS Data Center sends the TCU start signal to the vehicle via SMS.
- The vehicle processes the TCU start signal in TCU that is received by the TEL antenna, and starts TCU.
- After startup, TCU checks the EV-CAN communication status. If it is OK, TCU receives the remote air conditioning operation from the Nissan CARWINGS Data Center via packet communication.
- TCU sends the EV system start request signal to VCM via hard wire and sends the remote air conditioning request signal via EV-CAN.
- VCM is activated to start the air conditioning. VCM sends the VCM status signal and VCM activate/deactivate signal to TCU to notify that VCM is activated. For A/C-heater operation, refer to "AIR CONDITIONER CONTROL : System Description" Air Conditioner Control.
- When the air conditioning operation is started, TCU receives the pre-A/C signal from VCM and notifies the user's cellular phone or PC through the Nissan CARWINGS Data Center via packet communication that the air conditioning is activated.
- The vehicle air conditioning is turned ON at the time set by the user with a cellular phone or PC.
NOTE:
- If the air conditioning is operated with the charging plug inserted, battery power is saved.
- The timer is controlled by the Nissan CARWINGS Data Center.
- The user operates the remote air conditioning timer reservation with a cellular phone or PC and sends the data to the Nissan CARWINGS Data Center via the web site.
- The Nissan CARWINGS Data Center sends the TCU start signal to the vehicle via SMS when the timer reservation time is reached.
- The vehicle processes the TCU start signal in TCU that is received by the TEL antenna, and starts TCU.
- After startup, TCU checks the EV-CAN communication status. If it is OK, TCU receives the remote air conditioning operation from the Nissan CARWINGS Data Center via packet communication.
- TCU sends the EV system start request signal to VCM through hard wire and sends the remote air conditioning request signal via EV-CAN.
- VCM is activated to start the air conditioning. VCM sends the VCM status signal and VCM activate/deactivate signal to TCU to notify that VCM is activated. For A/C-heater operation, refer to "AIR CONDITIONER CONTROL : System Description" Air Conditioner Control.
- When the air conditioning operation is started, TCU receives the pre-A/C signal from VCM and notifies the user's cellular phone or PC through the Nissan CARWINGS Data Center via packet communication that the air conditioning is activated.
- When the operation is completed, TCU sends the VCM sleep signal to VCM via EV-CAN communication to stop operation.
NOTE:
- If the air conditioning is not turned ON, the Nissan CARWINGS Data Center sends an e-mail to the user for notification.
- During operation of the remote air conditioning, the vehicle is operating the air conditioning circuit only.
- If the power switch is turned ON during operation of the remote air conditioning, the operation stops.
Remote Charge Operation
Before/after driving the vehicle, remote charge operation can be performed through the Nissan CARWINGS
Data Center by operating a user's cellular phone or PC. When using the remote control operation, the charging plug must be inserted into the vehicle and the vehicle must be stopped in a location where radio waves between the Nissan CARWINGS Data Center and vehicle can be received.
1.The user operates remote charge start with a cellular phone or PC and sends the data to the Nissan CARWINGS Data Center via the web site.
2.The Nissan CARWINGS Data Center sends the TCU start signal to the vehicle via SMS.
3.The vehicle processes the TCU start signal in TCU that is received by the TEL antenna, and starts TCU.
4.After startup, TCU checks the EV-CAN communication status. If it is OK, TCU receives the remote charge operation from the Nissan CARWINGS Data Center via packet communication.
5.TCU sends the EV system start request signal to VCM via hard wire and sends the remote air conditioning request signal via EV-CAN.
6.When VCM is activated and charging is started, VCM sends the VCM status signal and VCM activate/
deactivate signal to TCU to notify that VCM is activated. For charging operation, refer to {LINK_TO_MANY:0000000007633674}{LINK_TO_MANY:0000000007633675}, "LI-ION
BATTERY CHARGE CONTROL : System Description".
7.When charge is started, TCU receives the charge status signal and the remaining time to charge completion signal from VCM, and the charge status is sent to the user's cellular phone or PC through the Nissan
CARWINGS Data Center via packet communication.
8.When charge is completed, TCU receives the charge status signal from VCM that charge is stopped, and notifies the user's cellular phone or PC through the Nissan CARWINGS Data Center via packet communication that the charge is completed.
9.When the timer operation is completed, TCU sends the VCM sleep signal to VCM to stop operation.
NOTE:
- If charge is not started, the Nissan CARWINGS Data Center sends an e-mail to the user for notification.
- If charge is abnormally ended for any reason, an e-mail indicating completion of charge in the same manner as a normal charge is notified. After charging, check the charge status.
Automatic Notification for Unplugged Status/Charge Status
TCU detects the charge status and notifies the Nissan CARWINGS Data Center of non-plug insertion and charge stop.
- When the power switch is OFF, check the charging plug fitting status after the time set on the screen. If the charging plug is not inserted, a notification is sent to the user's cellular phone and PC through the Nissan
CARWINGS Data Center.
- The system operates within 100 m of the location registered by the user.
- When the charging plug fitting check time is reached after the power switch is OFF, VCM is activated.
- Check the charging plug fitting with the charging plug connection signal and if the charging plug is not inserted, a notification is sent to the user's cellular phone and PC through the Nissan CARWINGS Data Center.
NOTE:
This process is effective only for normal charging plug and it is not compatible with quick charge.
- A completion of charge notification is sent to the user's cellular phone and PC through the Nissan CARWINGS Data Center.
- When charge is completed, TCU receives the charge status signal from VCM that charge is stopped, and notifies the user's cellular phone or PC through the Nissan CARWINGS Data Center via packet communication that the charge is completed.
NOTE:
- For abnormal completion (loose charging plug for any reason), the function to notify that charge operation is stopped sends an e-mail in the same manner as a normal end.
- Notification of charge status can be set between ON and OFF on the CARWINGS menu screen.
Charge Check
- The vehicle charge condition can be checked.
- The user operates a charge check with a cellular phone or PC and the data is sent to the Nissan CARWINGS Data Center through the web site.
- The Nissan CARWINGS Data Center sends the TCU start signal to the vehicle via SMS.
- The vehicle processes the TCU start signal in TCU that is received by the TEL antenna, and starts TCU.
- After startup, TCU checks the EV-CAN communication status. If it is OK, TCU receives the charge status check operation from the Nissan CARWINGS Data Center via packet communication.
- TCU sends the EV system start request signal to VCM via hard wire and sends the remote air conditioning request signal via EV-CAN.
- VCM starts. VCM sends the VCM status signal and VCM activate/deactivate signal to TCU to notify that
VCM is activated.
- TCU receives the Li-ion battery capacity signal necessary for the remaining battery indication and full charge capacity indication from VCM and the Li-ion battery deterioration signal from Li-ion battery via EV-CAN communication.
- TCU sends the charge status to the user's cellular phone and PC through the Nissan CARWINGS Data Center via packet communication.
- When the timer operation is completed, TCU sends the VCM sleep signal to VCM to stop operation.
Drive plan
- A drive plan determined in advance can be sent to the vehicle from a PC to the vehicle through the Nissan
CARWINGS Data Center.
- TCU receives the data through the TEL antenna and sends it to the AV control unit. The AV control unit converts the data into signals for display on the navigation route guide.
ECO drive
- Based on the data stored at the Nissan CARWINGS Data Center, ECO drive history, advice, ECO rank, etc.
are displayed and checked with probe information.
pro multis Credits:Operation CHARM About Operation CHARM