Removal And Installation

FRONT COMBINATION LAMP

Removal and Installation


REMOVAL


CAUTION:
Disconnect the 12V battery negative terminal or remove the fuse to electric leakage. Refer to "Precaution for Removing 12V Battery" Precaution For Removing 12V Battery.
1.Remove front bumper fascia. Refer to "Removal and Installation" Removal And Installation.
2.Remove front side maker lamp mounting bolts.
3.Pull up front side maker lamp, and then remove front side maker lamp.
4.Remove front combination lamp mounting bolts.
5.Pull out front combination lamp forward the vehicle, and then disconnect the connector before removing front combination lamp.

INSTALLATION

Note the following item, and then install in the reverse order of removal.
NOTE:
After installation, perform aiming adjustment. Refer to "Description" Description.