Overhaul

FRONT COMBINATION LAMP

Disassembly and Assembly


DISASSEMBLY

1.Rotate resin cap counterclockwise and unlock it.
2.Rotate parking lamp bulb socket counterclockwise and unlock it.
3.Disconnect parking lamp harness connector.
4.Rotate headlamp bulb (HI) counterclockwise and unlock it.
5.Disconnect headlamp bulb (HI) harness connector.
6.Rotate turn signal lamp bulb socket counterclockwise and unlock it.
7.Remove turn signal lamp bulb from bulb socket.
8.Remove LED headlamp control module mounting screws.
9.Disconnect LED headlamp control module harness connector, and then remove LED headlamp control module.
10.Remove combination lamp harness connector.

ASSEMBLY

Note the following items, and then assemble in the reverse order of disassembly.

CAUTION:
- Install LED headlamp control module securely.
- Always replace seal packing, when remove/replace LED headlamp control module.
- After installing the bulb, install the resin cap and the bulb socket securely for watertightness.