Buzzer (Combination Meter)

BUZZER (COMBINATION METER)

Component Function Check


1. CHECK FUNCTION

1.Select "INTELLIGENT KEY" of "BCM" using CONSULT.
2.Select "INSIDE BUZZER" in "ACTIVE TEST" mode.
3.Touch "Key", "Knob" or "Take Out" to check that it works normally.
Is the inspection result normal?
Yes- Buzzer (combination meter) is OK.
No- Refer to "Diagnosis Procedure" .


Diagnosis Procedure


1. CHECK METER BUZZER CIRCUIT

Refer to "Component Function Check" Meter Buzzer Circuit.
Is the inspection result normal?
Yes- GO TO 2.
No- Repair or replace the malfunctioning parts.

2. CHECK INTERMITTENT INCIDENT

Refer to "Intermittent Incident" Intermittent Incident.
- INSPECTION END