Removal And Installation

VCM

Removal and Installation


REMOVAL

1.Turn power switch OFF and wait at least 20 seconds.
2.Disconnect the 12V battery negative terminal.
3.Remove the glove box cover assembly. Refer to "Exploded View" Exploded View.
4.Disconnect VCM harness connector.
5.Remove VCM mounting nuts.
6.Remove VCM.
7.Remove VCM bracket mounting bolts.
8.Remove VCM bracket.

INSTALLATION

Install in the reverse order of removal.

CAUTION:
Must be perform additional service when replacing VCM. Refer to "Work Procedure" Work Procedure.