Work Procedure

INSPECTION AND ADJUSTMENT

ADDITIONAL SERVICE WHEN TCU CONNECTING CENTER CHANGED : Work Procedure


1. INFORMATION CENTER CONNECTION SETTINGS

CONSULT work support
1.Wait for 5 seconds or more after turning the power switch ON.
2.Touch "TELEMATICS" on the CONSULT screen.
3.After performing System Call of CONSULT, touch the "Work support" tab.
4.On the work support screen of CONSULT, select "CENTER CONNECTION SETTING" and touch "Start."
5.On the CENTER CONNECTION SETTING screen, touch "Start."
- GO TO 2.

2. INPUT OF PERSONAL ID AND PASSWORD (USER OPERATION)

1.Enter personal ID and password by vehicle operation.
2.Press " (Zero emission)"of multifunction switch.





3.Select "CARWINGS" and check radio wave status of TELEMATICS indicated on the top right.

4.Select "CARWINGS""CARWINGS settings""Sign in."
5.Enter user ID and password to select "Register."
6.Voice guidance is heard, and the communication with the Information Center starts.
7.Test results from the Information Center are shown on the display.
Check displayed results.
Displays registration completion screen.-GO TO 3.
Displays "Can't connect to center"-Check user ID and password. Go back to Step 2 [2.INPUT OF PERSONAL ID AND PASSWORD (USER OPERATION)].

3. CONFIRMATION OF OPERATION

1.Press " (Zero emission)" of multifunction switch.
2.Select "CARWINGS""All Information Feeds"Contents of Info from NISSAN.
Check displayed results.
Displays contents of All Information Feeds.-WORK END
Displays "Can't connect to center"-Select and check a different item of All Information Feeds, or GO TO 2.