Removal And Installation

YAW RATE/SIDE/DECEL G SENSOR


Removal and Installation


REMOVAL

CAUTION:
Never drop or strike yaw rate/side/decel G sensor, because it has little endurance to impact. Never use a pneumatic tool.
1. Remove front seat (right side). Removal and Installation.
2. Remove floor carpet. Removal And Installation.
3. Disconnect yaw rate/side/decel G sensor harness connector.
4. Remove yaw rate/side/decel G sensor.

INSTALLATION
Note the following, and install in the reverse order of removal.
- Never drop or strike yaw rate/transverse/decel G sensor, because it has little endurance to impact. Never use a power tool.