Intake Sensor Removal And Installation

INTAKE SENSOR


Removal and Installation


REMOVAL
1. Remove evaporator assembly. Service and Repair.
2. Remove intake sensor from evaporator.

INSTALLATION
Note the following items, and then install in the order of removal.

CAUTION:
- Replace O-rings with new ones. Then apply the compressor oil to them when installing.
- Mark the mounting position of intake sensor bracket prior to removal so that the reinstalled sensor can be located in the same position.
- Never rotate the bracket insertion part when removing and installing the intake sensor.
- Check for leakages when recharging refrigerant. Leak Test.