Removal and Installation

WATER PUMP


Removal and Installation


REMOVAL
1. Drain engine coolant from radiator. Draining Engine Coolant.

CAUTION:
- Perform this step when the engine is cold.
- Never spill engine coolant on drive belt.
2. Steer front wheel to the right.
3. Remove front fender protector (RH). Exploded View.
4. Remove drive belt. Removal and Replacement.
5. Remove water pump.
- Engine coolant will leak from cylinder block, so have a receptacle ready below.

CAUTION:
- Handle water pump vane so that it does not contact any other parts.
- Water pump cannot be disassembled and should be replaced as a unit.

INSTALLATION
Install in the reverse order of removal.