Without Intelligent Key System

AUTO DOOR LOCK OPERATION DOES NOT OPERATE





Diagnosis Procedure
1.CHECK "AUTO LOCK SET" SETTING WITH CONSULT-III
1. Select "MULTI REMOTE ENT" of "BCM" using CONSULT-III.
2. Select "AUTO LOCK SET" in "WORK SUPPORT" mode.
3. Check "AUTO LOCK SET" in "WORK SUPPORT". Testing and Inspection.
Is the inspection result normal?
YES - GO TO 2.
NO - Set "AUTO LOCK SET" in "WORK SUPPORT".
2.REPLACE BCM
1. Replace BCM. Removal And Installation.
2. Confirm the operation after replacement.
Is the result normal?
YES - INSPECTION END
NO - Check intermittent incident. Intermittent Incident.