Key Out Interlock Door Unlock Function Does Not Operate

KEY OUT INTERLOCK DOOR UNLOCK FUNCTION DOES NOT OPERATE





Diagnosis Procedure
1.CHECK "AUTOMATIC LOCK/UNLOCK SELECT" SETTING IN "WORK SUPPORT"
1. Select "DOOR LOCK" of "BCM" using CONSULT-III.
2. Select "AUTOMATIC LOCK/UNLOCK SELECT" in "WORK SUPPORT" mode.
3. Check "AUTOMATIC LOCK/UNLOCK SELECT" in "WORK SUPPORT". Without Intelligent Key System.
Is the inspection result normal?
YES - GO TO 2.
NO - Set "AUTOMATIC LOCK/UNLOCK SELECT" in "WORK SUPPORT".
2.CHECK "AUTOMATIC DOOR UNLOCK SELECT" SETTING IN "WORK SUPPORT"
1. Select "DOOR LOCK" of "BCM" using CONSULT-III.
2. Select "AUTOMATIC DOOR UNLOCK SELECT" in "WORK SUPPORT" mode.
3. Check "AUTOMATIC DOOR UNLOCK SELECT" in "WORK SUPPORT". Without Intelligent Key System.
Is the inspection result normal?
YES - GO TO 3.
NO - Set "AUTOMATIC DOOR UNLOCK SELECT" in "WORK SUPPORT".
3.CHECK KEY SWITCH
Check key switch.
Is the inspection result normal?
YES - GO TO 4.
NO - Repair or replace the malfunctioning parts.
4.REPLACE BCM
1. Replace BCM. Removal And Installation.
2. Confirm the operation after replacement.
Is the result normal?
YES - INSPECTION END
NO - Check intermittent incident. Intermittent Incident.