With Intelligent Key System

VEHICLE SECURITY SYSTEM CANNOT BE SET:_:DOOR LOCK AND UNLOCK SWITCH





Description
Armed phase is not activated when all doors are locked by door lock and unlock switch.

NOTE:
Check that vehicle is under the condition shown in "CONDITIONS OF VEHICLE (OPERATING CONDITIONS)" before starting diagnosis, and check each symptom.

CONDITION OF VEHICLE (OPERATING CONDITIONS)
"SECURITY ALARM SET": ON
Check the setting of "SECURITY ALARM SET" in "Work Support" mode of "THEFT ALM" of "BCM" using
CONSULT-III.




Diagnosis Procedure
1.CHECK DOOR LOCK FUNCTION
Lock/unlock door using mechanical key inserted into door key cylinder. System Description.
Is the inspection result normal?
YES - GO TO 2.
NO - Check Intelligent Key system (remote keyless entry function). With Intelligent Key System.
2.CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES - Check intermittent incident. Intermittent Incident.
NO - GO TO 1.