Without Intelligent Key System

VEHICLE SECURITY ALARM DOES NOT ACTIVATE





Description
Alarm does not operate when alarm operating condition is satisfied.

NOTE:
Check that vehicle is under the condition shown in "CONDITIONS OF VEHICLE (OPERATING CONDITIONS)" before starting diagnosis, and check each symptom.

CONDITION OF VEHICLE (OPERATING CONDITIONS)
"SECURITY ALARM SET": ON
Check the setting of "SECURITY ALARM SET" in "Work Support" mode of "THEFT ALM" of "BCM" using
CONSULT-III.




Diagnosis Procedure
1.CHECK DOOR SWITCH
Check door switch. Without Intelligent Key System.
Is the inspection result normal?
YES - GO TO 2.
NO - Replace the malfunctioning door switch
2.CHECK HEADLAMP FUNCTION
Check headlamp function. Without Intelligent Key System.
Is the inspection result normal?
YES - GO TO 3.
NO - Repair or replace malfunctioning parts.
3.CHECK HORN FUNCTION
Check horn function. Without Intelligent Key System.
Is the inspection result normal?
YES - GO TO 4.
NO - Repair or replace the malfunctioning parts.
4.CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES - Check intermittent incident. Intermittent Incident.
NO - GO TO 1.