Removal And Installation

EVAP CANISTER


AWD : Removal and Installation


REMOVAL
1. Remove rear stabilizer (1). Exploded View.










2. Disconnect harness connectors (EVAP control pressure sensor and EVAP canister vent control valve) and EVAP canister hoses.
3. Remove EVAP canister fixing bolt.
4. Remove EVAP canister.

NOTE:
EVAP canister vent control valve and EVAP control pressure sensor can be removed without removing the EVAP canister.

INSTALLATION
Install in the reverse order of removal.

NOTE:
Tighten EVAP canister fixing bolt to the specified torque.