Removal and Replacement

DUAL PROPORTIONING VALVE


Removal and Installation












Removal

CAUTION:
Be careful not to splash brake fluid on painted areas; it may cause paint damage. If brake fluid is splashed on paint areas, wash it away with water immediately.
1. Drain the brake fluid. Removal and Replacement.
2. Disconnect brake lines from dual proportioning valve.
- Mark brake lines for installation.
3. Remove dual proportioning valve bolt and dual proportioning valve.
4. Remove two bolts and bracket.

Installation
Installation is in the reverse order of removal.
- When installing brake lines to the dual proportioning valve, tighten to specifications. Diagrams.
- Refill and bleed the brake system. Service and Repair.

CAUTION:
- Carefully monitor brake fluid level at master cylinder.
- Use the recommended new brake fluid.
- Be careful not to splash brake fluid on painted areas; it may cause paint damage. If brake fluid is splashed on paint areas, wash it away with water immediately.