With Intelligent Key System

HAZARD AND HORN REMINDER DOES NOT OPERATE


Diagnosis Procedure

1.CHECK "HAZARD ANSWER BACK" SETTING IN "WORK SUPPORT"
Check "HAZARD ANSWER BACK" setting in "WORK SUPPORT". CONSULT-III Function (BCM - Intelligent Key).
Is the inspection result normal?
YES - GO TO 2.
NO - Set "HAZARD ANSWER BACK" setting in "WORK SUPPORT".
2.CHECK "HORN WITH KEYLESS LOCK" SETTING IN "WORK SUPPORT".
Check "HORN WITH KEYLESS LOCK" setting in "WORK SUPPORT". CONSULT-III Function (BCM - Intelligent Key).
Is the inspection result normal?
YES - GO TO 3.
NO - Set "HORN WITH KEYLESS LOCK" setting in "WORK SUPPORT".
3.CHECK POWER POSITION
Check if ignition switch position is changing or not.
Does ignition switch position change?
YES - GO TO 4.
NO - Check BCM for DTC. Testing and Inspection.
4.CHECK HAZARD FUNCTION
Check hazard function. With Intelligent Key System.
Is the inspection result normal?
YES - GO TO 5.
NO - Repair or replace the malfunctioning parts.
5.CHECK HORN FUNCTION
Check horn function. With Intelligent Key System.
Is the inspection result normal?
YES - GO TO 6.
NO - Repair or replace the malfunctioning parts.
6.CHECK DOOR SWITCH
Check door switch. With Intelligent Key System.
Is the inspection result normal?
YES - GO TO 7.
NO - Repair or replace the malfunctioning parts.
7.CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES - Check intermittent incident. Intermittent Incident.
NO - GO TO 1.