Input Shaft And Gears

INPUT SHAFT AND GEAR


Disassembly and Assembly


INSPECTION AFTER DISASSEMBLY

Input Shaft and Gears
Check the following items and replace if necessary.





- Damage, peeling, bend, uneven wear, and distortion of shaft
- Excessive wear, damage, and peeling of gear

Synchronizer
Check for the following and replace if necessary.





- Contact surface breakage, damage, and unusual wear of coupling sleeve, synchronizer hub, and synchronizer lever.
- Coupling sleeve and synchronizer hub move smoothly.





- Breakage, damage, and excessive wear of baulk ring cam surface and synchronizer lever contact surface.

Bearing






Check bearing for damage and un-smooth rotation. Replace if necessary.