Diagnosis Procedure

ELECTRICAL LOAD SIGNAL


Diagnosis Procedure

1.INSPECTION START
Confirm the malfunctioning circuit (rear window defogger, headlamp or heater fan). Refer to Component Function Check.
Which circuit is related to the incident?
Rear window defogger>>GO TO 2.
Headlamp>>GO TO 3.
Heater fan>>GO TO 4.
2.CHECK REAR WINDOW DEFOGGER SYSTEM
Refer to Initial Inspection and Diagnostic Overview.
>> INSPECTION END
3.CHECK HEADLAMP SYSTEM
Refer to How to Perform Trouble Diagnosis (For USA)
>> INSPECTION END
4.CHECK HEATER FAN CONTROL SYSTEM
Refer to Initial Inspection and Diagnostic Overview.
>> INSPECTION END