Main Bearing Cap

Main Bearing Cap

Tighten main bearing cap bolts in numerical order shown with the following steps.

Arrow Indicates Engine front

a. Apply new engine oil to threads and seat surfaces of the bolts.
b. Tighten main bearing cap bolts in the numerical order shown.

: 32.4 N.m (3.3 kg-m, 24 ft-lb)






c. Turn main bearing cap bolts 60 degrees clockwise (angle tightening) in numerical order shown.

CAUTION:
Check and confirm the tightening angle by using Tool (A) or protractor. Avoid judgment by visual inspection without the tool.

Tool number : KV10112100 (BT-8653-A)