Only Front Wiper Intermittent Does Not Operate

FRONT WIPER AND WASHER SYSTEM


Only Front Wiper Intermittent Does Not Operate

1. CHECK COMBINATION SWITCH

With CONSULT-III
1. Select "BCM" on CONSULT-III, and select "WIPER" on "SELECT TEST ITEM" screen.
2. Select "DATA MONITOR". Make sure that "FR WIPER INT", turn ON-OFF according to wiper switch operation.
Without CONSULT-III
Refer to Component Tests and General Diagnostics.
OK or NG
OK >> Replace BCM. Refer to Service and Repair.
NG >> Check combination switch (wiper switch). Refer to Component Tests and General Diagnostics.