Long Stopping Distance

TROUBLE DIAGNOSIS FOR SYMPTOMS


Long Stopping Distance

INSPECTION PROCEDURE
1.CHECK BASE BRAKING SYSTEM PERFORMANCE
1. Disable ABS by disconnecting ABS actuator and electric unit (control unit) connector.
2. Drive vehicle and check brake operation.

NOTE:
- Stopping distance may be longer than vehicles without ABS when road condition is slippery.
- Driving the vehicle with the ABS actuator and electric unit (control unit) disconnected may induce DTCs in electrical control units using CAN communication. After the inspection, clear all DTCs. Refer to Scan Tool Testing and Procedures.
OK or NG
OK >> Go to ABS Works Frequently.
NG >> Perform Basic Inspection. Refer to .