"P-Shift" Warning Lamp Check

INTELLIGENT KEY SYSTEM


"P-SHIFT" Warning Lamp Check

1. CHECK WARNING LAMP OPERATION
With CONSULT-III
- Check "INDICATOR" in "ACTIVE TEST" mode with CONSULT-III.
- Select "KNOB ON".
"P-SHIFT" warning lamp should illuminate.
Without CONSULT-III
1. Turn ignition switch OFF.
2. While monitoring the combination meter warning lamps, turn ignition switch ON. "P-SHIFT" warning lamp should illuminate for 1 second to perform a bulb check.
OK or NG
OK >> Inspection end.
NG >> Check combination meter. Refer to Locations System Description.