With Manufacturer Scan Tool (CONSULT-II)

HOW TO ERASE SELF-DIAGNOSIS RESULTS

NOTE: If the memory in "SELF-DIAG [PAST]" is not erased, User mode will continue to show the system malfunction by the operation of the warning lamp even if the malfunction is repaired completely.

- "SELF-DIAG[CURRENT]"
A current self-diagnosis result is displayed on the CONSULT-III screen in real time. After the malfunction is repaired completely, no malfunction is detected on SELF-DIAG [CURRENT]".

- "SELF-DIAG [PAST]"
Return to the SELF-DIAG [CURRENT]" CONSULT-III screen and select SELF-DIAG [CURRENT]". Touch ERASE" in SELF-DIAG [CURRENT]" mode.

- "TROUBLE DIAG RECORD"
The memory of "TROUBLE DIAG RECORD" cannot be erased.