Rear

REMOVAL OF SEAT BELT RETRACTOR
1. Remove the rear seat cushion and fold the seatback to the down position.
2. Remove the kicking plate upper and lower finishers.
3. Remove the lower anchor.
- For RH/LH lower anchor, remove the lower anchor bolt.
- For center lower anchor, release the center latch.

4. Release the tabs and remove the seat belt escutcheon.
5. Remove the rear parcel shelf finisher.
6. Remove the seat belt retractor anchor bolt, then remove the seat belt retractor.

INSTALLATION OF SEAT BELT RETRACTOR
Installation is in the reverse order of removal.