With Generic Scan Tool

HOW TO ERASE EMISSION-RELATED DIAGNOSTIC INFORMATION

How to Erase DTC

With GST
The emission related diagnostic information in the ECM can be erased by selecting Service $04 with GST.

NOTE: If the DTC is not for CVT related items (see "INDEX FOR DTC"), skip step 2.

1. If the ignition switch stays ON after repair work, be sure to turn ignition switch OFF once.
Wait at least 10 seconds and then turn it ON (engine stopped) again.
2. Perform CVT-27, "HOW TO ERASE DTC (WITH GST)". With Generic Scan Tool (The DTC in the TCM will be erased.)
3. Select Service $04 with GST (Generic Scan Tool).