The Alignment Process

THE ALIGNMENT PROCESS

IMPORTANT: Use only the alignment specifications listed. Refer to FSU-19, "Wheel Alignment (Unladen*)". Specifications

1. When displaying the alignment settings, many alignment machines use indicators: (Green/red, plus or minus, Go/No Go). Do NOT use these indicators.
- The alignment specifications programmed into your alignment machine that operate these indicators may not be correct.
- This may result in an ERROR.
2. Some newer alignment machines are equipped with an optional Rolling Compensation method to compensate the sensors (alignment targets or head units). Do NOT use this Rolling Compensation method.
- Use the Jacking Compensation method. After installing the alignment targets or head units, raise the vehicle and rotate the wheels 1/2 turn both ways.
- See Instructions in the alignment machine you are using for more information.