High-Pressure Flexible Hose

Removal and Installation for High-pressure Flexible Hose

REMOVAL
1. Discharge the refrigerant. Refer to "HFC-134a (R-134a) Service Procedure".
2. Remove the high-pressure flexible hose. Refer to "Components".

CAUTION: Cap or wrap the joint of the hose with a suitable material such as vinyl tape to avoid the entry of contaminants.

INSTALLATION
Installation is in the reverse order of removal.

CAUTION:
- Replace the O-ring of the high-pressure flexible hose with a new one, then apply A/C oil to it for installation.
- After charging the refrigerant, check for leaks. Refer to "Checking for Refrigerant Leaks".