Removal and Replacement

REAR DRUM BRAKE

Exploded View BR-36:

CAUTION:
- Clean dust on drum and back plate with a vacuum dust collector. Do not blow with compressed air.
- Make sure parking brake lever is released completely.

Removal and Installation of Wheel Cylinder
REMOVAL
1. Drain brake fluid.
2. Remove the rear brake shoe assembly.
3. Remove the brake tube from the wheel cylinder.
4. Remove bolts on the wheel cylinder, and then remove wheel cylinder from the back plate.

INSTALLATION
- Installation is the reverse order of removal. Tighten bolts to the specified torque.
- Refill with new brake fluid and bleed air.