Front

Disassembly and Assembly

Exploded View SE-14:

SEAT CUSHION TRIM AND PAD

CAUTION:
- Front passenger seat is equipped with an Occupant Detection System sensor and control module. Do not disassemble front passenger seat cushion assembly or remove the trim as this will affect the Occupant Detection System calibration.
- During installation, the wire harness clips must be installed in the holes they were originally in. Do not add additional clips.

Disassembly
1. Remove seat.
2. Remove the seat lift lever and recline knobs (if equipped).




3. Remove the left and right front seat cushion finisher(s).
4. Remove the air bag harness clips.
5. Remove the seat cushion retainers to separate the trim cover from the pad.

ASSEMBLY
Assembly is in the reverse order of disassembly.