Weatherstrip

WEATHERSTRIP
1. Visually check weatherstrip for damage, deterioration, or deformation.
- Open glass lid assembly enough to inspect front edge of weatherstrip.
- Tilt up glass lid assembly fully to inspect sides and rear edge of weatherstrip.

If any area of the weatherstrip is found to be damaged, replace the glass lid assembly. Refer to "GLASS LID".

2. Check for leakage around glass lid.
- Close glass lid fully.
- Pour water around surface to determine area of concern.
- For gaps or misalignment, adjust glass lid to specifications. Refer to "Fitting Adjustment".
- For damaged sealing surfaces, either replace glass "GLASS LID", or repair the panel "Precautions in Repairing High Strength Steel".