Rear Door: Adjustments

DOOR




Fitting Adjustment

REAR DOOR

Longitudinal Clearance
1. Remove the center pillar upper and lower garnishes. Refer to "BODY SIDE TRIM".
2. Open the front door and loosen the rear door hinge bolts.
3. From inside the vehicle, loosen the upper hinge nut. Open the rear door, and raise or lower the rear door at the rear edge according to specification.
4. Tighten the rear door hinge bolts and nut.

Rear door hinge bolts 23.7 N-m (2.4 kg-m, 17 ft-lb)
Rear door hinge to center pillar nut 28.8 N-m (2.9 kg-m, 21 ft-lb)

5. Install the center pillar upper and lower garnishes. Refer to "BODY SIDE TRIM".

Surface Height Adjustment
1. Loosen the rear door hinge nuts.
2. Adjust the surface height difference of front and rear doors according to specification.
3. Tighten the rear door hinge nuts.