Intake Manifold Installation
Intake ManifoldIntake Manifold / Torque Sequence:
^ Tighten in numerical order shown in the figure.
1. Tighten all bolts and nuts to 4.9 - 9.8 Nm (0.50 - 0.99 kg-m, 4 - 7 ft. lbs.).
2. Finally tighten all bolts and nuts to 26.5 - 31.4 Nm (2.7 - 3.2 kg-m, 20 - 23 ft. lbs.).
^ Tighten all bolts and nuts to the final torque, evenly dividing the tightening into at least three steps.