General Specifications
| Cam Height "A" | Intake | 40.565 - 40.755 Millimeter (mm) | |
| Exhaust | 40.056 - 40.246 Millimeter (mm) | ||
| Cam Wear Limit | 0.20 Millimeter (mm) | ||
| Camshaft Journal to Bearing Clearance | Intake | Standard | 0.030 - 0.071 Millimeter (mm) |
| Limit | 0.135 Millimeter (mm) | ||
| Exhaust | Standard | 0.045 - 0.086 Millimeter (mm) | |
| Limit | 0.15 Millimeter (mm) | ||
| Inner Diameter of Camshaft Bearing | No.1 | Standard | 28.000 - 28.021 Millimeter (mm) |
| No.2 to No.5 | Intake | 23.985 - 24.006 Millimeter (mm) | |
| No.2 to No.5 | Exhaust | 24.000 - 24.021 Millimeter (mm) | |
| Outer Diameter of Camshaft Journal | No.1 | Standard | 27.935 - 27.955 Millimeter (mm) |
| No.2 to No.5 | Standard | 23.935 - 23.955 Millimeter (mm) | |
| Camshaft Runout [TIR] [TIR] = Total indicator reading | Standard | Less Than 0.02 Millimeter (mm) | |
| Limit | 0.1 Millimeter (mm) | ||
| Camshaft End Play | Standard | 0.115 - 0.188 Millimeter (mm) | |
| Limit | 0.20 Millimeter (mm) |