Headliner: Service and Repair

Removal and Installation

CAUTION: Disconnect both terminals from battery in advance.

1. Remove driver air bag module and steering wheel.
2. Fully tilt front right and left seat backs backward.
3. Remove front pillar garnish, front and rear kick plates.
4. Remove center pillar lower and upper garnish, and rear pillar garnish.
5. Remove sun visors.
6. Remove interior lamp.
7. Remove assist grips (if equipped). A
8. Remove sunroof welt (if equipped) and door welts.
9. Remove sunroof switch (if equipped) and map lamp assembly.
10. Remove clips attached to roof.
11. Take out headlining from the front passenger door.