Camshaft, Engine
Camshaft | Journal to Bearing Clearance | No.1 | Standard | 0.045 - 0.086 Millimeter (mm) |
No.2, 3, 4 | Standard | 0.035 - 0.076 Millimeter (mm) | ||
Limit | 0.15 Millimeter (mm) | |||
Inner Diameter of Camshaft Bearing | No.1 | Standard | 26.000 - 26.021 Millimeter (mm) | |
No.2, 3, 4 | Standard | 23.500 - 23.521 Millimeter (mm) | ||
Outer Diameter of Camshaft Journal | No.1 | Standard | 25.935 - 25.955 Millimeter (mm) | |
No.2, 3, 4 | Standard | 23.445 - 23.465 Millimeter (mm) | ||
Camshaft Runout [TIR] [TIR] = Total indicator reading | Standard | Less Than 0.02 Millimeter (mm) | ||
Limit | 0.05 Millimeter (mm) | |||
Camshaft Sprocket Runout [TIR] [TIR] = Total indicator reading | Standard | Less Than 0.15 Millimeter (mm) | ||
Camshaft End Play | Standard | 0.115 - 0.188 Millimeter (mm) | ||
Limit | 0.24 Millimeter (mm) | |||
Cam Height "A" | Intake | 43.940 - 44.130 Millimeter (mm) | ||
Exhaust | 44.465 - 44.655 Millimeter (mm) | |||
Wear Limit of Cam Height | 0.2 Millimeter (mm) | |||
Camshaft Brackets | Bolts | Refer to Procedure Under Cylinder Head Assembly; Service and Repair; Removal and Installation. | ||
Valve Timing Refer to Engine; Specifications for further information. | a | 232 Degrees (deg) | ||
b | 224 Degrees (deg) | |||
c | 3 Degrees (deg) | |||
d | 41 Degrees (deg) | |||
e | 3 Degrees (deg) | |||
f | 49 Degrees (deg) |