Control Module Pinout Values

ECM Harness Connector Terminal Layout:

Terminals 1 - 16:

Terminals 21 - 28:

Terminals 29 - 46:

Terminals 47 - 61:

Terminals 62 - 72:

Terminals 73 - 86:

Terminals 91 - 115:

ECM INSPECTION TABLE
Specification data are reference values and are measured between each terminal and body ground.

CAUTION: Do not use ECM ground terminals when measuring input/output voltage. Doing so may result in damage to the ECM's transistor. Use a ground other than ECM terminals, such as the ground.