Without Consult-II

DESCRIPTION
- The purpose of the test is to determine overall performance of A/T and analyze causes of problems.





- The road test consists of the following three parts:
1. Check before engine is started
2. Check at idle
3. Cruise test





- Before road test, familiarize yourself with all test procedures and items to check.
- Conduct tests on all items until specified symptom is found. Troubleshoot items which check out No Good after road test.





1. CHECK BEFORE ENGINE IS STARTED

2. CHECK AT IDLE





1 of 2





2 of 2

3. CRUISE TEST
- Check all items listed in Parts 1 through 3.





- Throttle position sensor can be checked by voltage across terminals 41 and 42 of TCM.


CRUISE TEST - Part 1





1 of 2





2 of 2





CRUISE TEST - Part 2





CRUISE TEST - Part 3