Canister Purge Volume Control Valve: Testing and Inspection

EVAP canister purge volume control solenoid valve










With Consult
1. Start engine.
2. Perform "PURG VOL CONT/V" in "ACTIVE TEST" mode with CONSULT-II. Check that engine speed varies according to the valve opening.
If OK, inspection end. If NG, go to following step.
3. Check air passage continuity.
If NG, replace the EVAP canister purge volume control solenoid valve.

OR







Without Consult
Check air passage continuity.
If NG or operation takes more than 1 second, replace solenoid valve.