Low Fuel Lamp/Indicator: Description and Operation

System Description

With the ignition switch in the ON or START position, power is supplied:
- through 10 A fuse (No. [12], located in the fuse block [J/B])
- to combination meter terminal (17).

Ground is supplied:
- to combination meter terminals (24) and (56)
- through body grounds (M2) and (M61).

Ground is supplied:
- to fuel level sensor unit terminal (E) and
- seat belt buckle switch terminal (2)
- through body grounds (B13) and (B19)

Ground is supplied:
- to brake fluid level switch terminal (2)
- through body grounds (E10) and (E34).

Ground is supplied
- to washer fluid level switch terminal (2)
- through body grounds (E10) and (E34)

LOW FUEL LEVEL WARNING LAMP
The amount of fuel in the fuel tank is determined by the fuel level sensor in the fuel tank. A signal is sent from fuel level sensor unit terminal (G) to combination meter terminal (20). The fuel level sensor will illuminate the low fuel level warning lamp when the fuel level is low.
With power and ground supplied, the low fuel level warning lamp illuminates.