Door/Trunk Ajar Indicator/Lamp: Description and Operation

System Description

With the ignition switch in the ON or START position, power is supplied:
- through 10 A fuse (No. [12], located in the fuse block [J/B])
- to combination meter terminal (17).

Ground is supplied:
- to combination meter terminals (24) and (56)
- through body grounds (M2) and (M61).

Ground is supplied:
- to fuel level sensor unit terminal (E) and
- seat belt buckle switch terminal (2)
- through body grounds (B13) and (B19)

Ground is supplied:
- to brake fluid level switch terminal (2)
- through body grounds (E10) and (E34).

Ground is supplied
- to washer fluid level switch terminal (2)
- through body grounds (E10) and (E34)

DOOR AJAR WARNING LAMP
When a door is open, ground is supplied:
- to combination meter terminal (7)
- from door switches terminal (1).

With power and ground supplied, the door ajar warning lamp illuminates.