Oil Pressure Warning Lamp/Indicator: Description and Operation

System Description

With the ignition switch in the ON or START position, power is supplied:
- through 10 A fuse (No. [12], located in the fuse block [J/B])
- to combination meter terminal (17).

Ground is supplied:
- to combination meter terminals (24) and (56)
- through body grounds (M2) and (M61).

Ground is supplied:
- to fuel level sensor unit terminal (E) and
- seat belt buckle switch terminal (2)
- through body grounds (B13) and (B19)

Ground is supplied:
- to brake fluid level switch terminal (2)
- through body grounds (E10) and (E34).

Ground is supplied
- to washer fluid level switch terminal (2)
- through body grounds (E10) and (E34)

LOW OIL PRESSURE WARNING LAMP
Low oil pressure causes oil pressure switch terminal (1) to provide ground to combination meter terminal (62).
With power and ground supplied, the low oil pressure warning lamp illuminates.