Parking Brake Control: Service and Repair

Removal and Installation
1. Remove center console.
2. Disconnect the parking brake front cable.
3. Remove the control lever.





4. Remove bolts, slacken off and remove the front cable.
5. Remove lock plate and disconnect cable.
6. Remove the rear cables.

Inspection
1. Check control lever or parking brake pedal assembly for wear or other damage. Replace if necessary.
2. Check cables for discontinuity or deterioration. Replace if necessary.
3. Check warning lamp and switch. Replace if necessary.
4. Check parts at each connecting portion and, if found deformed or damaged, replace.