Without Consult-II

DESCRIPTION
- The purpose of the test is to determine overall performance of A/T and analyze causes of problems.
- The road test consists of the following three parts:





1. Check before engine is started
2. Check at idle
3. Cruise test





- Before road test, familiarize yourself with all test procedures and items to check.
- Conduct tests on all items until specified symptom is found. Troubleshoot items which check out No Good after road test.

1. CHECK BEFORE ENGINE IS STARTED.





Chart 1





Chart 2

2. CHECK AT IDLE.





Chart 1





Chart 2





Chart 3





Chart 4





Chart 5





Chart 6





Chart 7

3. CRUISE TEST
- Check all items listed in Parts 1 through 3.





- Throttle position sensor can be checked by voltage across terminals 41 and 42 of TCM.

Cruise Test - Part 1





Chart 1





Chart 2





Chart 3





Chart 4





Chart 5





Chart 6





Chart 7





Chart 8

Cruise Test - Part 2





Chart 1





Chart 2





Chart 3





Chart 4

Cruise Test - Part 3





Chart 1





Chart 2





Chart 3





Chart 4





Chart 5





Chart 6