Front Seat Belt

Front Seat Belt:

REMOVAL AND INSTALLATION

1. Remove front seat.
2. Remove adjuster cover. A
3. Slide floor anchor cover.
4. Remove floor anchor bolt. B
5. Remove shoulder anchor bolt. C
6. Remove front and rear kicking plate, then remove center pillar upper and lower garnish.
7. Disconnect seat belt pre-tensioner connector.
8. Remove the screw securing seat belt pre-tensioner retractor, then remove seat belt and seat belt pre-tensioner retractor.
9. Remove bolts securing seat belt adjuster, then remove seat belt adjuster.

Reverse procedure to install.