Side Collision
Repairs and Inspections Required After A CollisionSIDE COLLISION
To repair the SRS for a side collision, perform the following steps.
When the side air bag is activated in the side collision:
1. Replace the following components:
- All parts of front seatback (including front seatback frame) with side air bag module (on the side on which side air bag is activated)
- Diagnosis sensor unit
- Satellite sensor (on the side on which side air bag is activated)
2. Check the SRS components and the related parts using the table shown below.
Replace any SRS components and the related parts showing visible signs of damage (dents, cracks, deformation).
3. Conduct self-diagnosis using CONSULT-II or "AIR BAG" warning lamp. Refer to "SRS Operation Check" for details. Ensure entire SRS operation properly.
[1][2]Component Tests and General Diagnostics
When SRS is not activated in the side collision:
SRS Inspection (For Side Collision):
SRS Inspection (For Side Collision) Part 2:
1. Check the SRS components and the related parts using the table as shown.
Replace any SRS components and the related parts showing visible signs of damage (dents, cracks, deformation).
2. Conduct self-diagnosis using CONSULT-II or "AIR BAG" warning lamp. Refer to "SRS Operation Check" for details. Ensure entire SRS operation properly.
[1][2]Component Tests and General Diagnostics