Sunroof / Moonroof Weatherstrip: Testing and Inspection

- In the case of leakage around glass lid, close glass lid and pour water over glass lid to find damaged or gap portion.

1. Remove glass lid assembly. (Refer to removal procedures, for details.)
2. Visually check weatherstrip for proper installation. If a gap exists between glass lid and weatherstrip, check for sufficient amount of butyl seal. If required, remove weatherstrip and apply butyl seal.
Refer to "EXTERIOR",for details.
3. Check weatherstrip visually for any damage, deterioration, or flattening.
- If any damage is found, replace weatherstrip.

CAUTION: Do not remove weatherstrip except when replacing, or filling up butyl seal.