Door Trim

Front door finisher
1. Remove inside handle escutcheon. [A]
2. Remove screw securing pull handle, and then remove pull handle.
3. Remove power window switch finisher, then disconnect the connectors. [B]
4. Remove mask securing front door finisher. [C
5. Remove screw securing front door finisher.
6. Remove clips securing front door finisher.
7. Lift out front door finisher. Disconnect harness connectors. [D]

Rear door finisher
8. Remove inside handle escutcheon. [E]
9. Remove screw securing pull handle, and then remove pull handle.
10. Remove power window switch finisher, then disconnect the connector. [F]
11. Remove clips securing rear door finisher.
12. Lift out rear door finisher. [G]