Synchronizer Ring, M/T

CLEARANCE BETWEEN BAULK RING AND GEAR
1st, 4th, 5th baulk ring
Standard Wear limit
1st 0.95 - 1.45 mm 0.7 mm
4th 0.9 - 1.45 mm 0.7
5th 0.9 - 1.5 mm 0.7 mm

2nd and 3rd baulk ring
Dimension Standard Wear Limit
A 0.7 - 0.9 mm 0.2 mm
B 0.6 - 1.1 mm 0.2 mm

AVAILABLE REVERSE CHECK PLUGS AND CASE COVERS
Reverse check plug
Reverse Check Turning Torque (At striking rod) 4.9 - 7.4 Nm

AVAILABLE SNAP RINGS
Input Shaft Front Bearing
Allowable Clearance 0 - 0.1 mm